PLA Cable Comb
Comb that separates and aligns a bundle of cables.
Drag to rotate · scroll to zoom
PLA Rack and Pinion Set
Toothed rack bar, matching pinion and a bored mounting block.
Free download · No sign-up required.
Recommended for this model
PLA High Speed [DEMO]
Details →
Fast-printing PLA for high-throughput prototyping.
Model Description
A linear-motion set with a proper module-matched rack and pinion so the teeth actually mesh. The mounting block takes a 5 mm shaft and bolts down through four M3 holes. Print the pinion upright with a brim; the rack prints flat without supports.
Printing Parameters
| Nozzle | 0.4 mm |
|---|---|
| Nozzle temperature | 210 °C |
| Bed temperature | 60 °C |
| Print speed | 60 mm/s |
| Layer height | 0.20 mm |
| Retraction | 1.0 mm @ 40 mm/s |
| Fan | 100 % |
| Drying | 45 °C / 4.0 h |
| Supports | No supports needed |
Standard PLA profile.
Model License
- Model LicenseFree for Personal Use
- Commercial UseNo
- Remix AllowedYes
- Attribution RequiredYes
Free to download and print for personal, non-commercial use. Attribution appreciated.
Report Model
If this model infringes your rights, tell us and we will review it.
Related Models
PLA Planetary Gear Kit
A printable planetary set: internal ring gear, sun gear and three planet gears.
PLA Desk Organizer Tray
Two-compartment desk tray for pens, clips and small tools.
PLA Geneva Indexer
Classic Maltese-cross indexing mechanism with four slots and a locking cam.
PLA Iris Mechanism
Eight-blade iris aperture: slotted base ring plus a spiral-slot rotor ring.
PLA Wall Hook
Screw-on hook for keys, towels and light tools.