Carbon fiber prints require careful support removal, edge protection and controlled sanding because the material can be abrasive and brittle. Do not overheat or remove large features by force.
Post-processing
- Remove supports by sections.
- Protect edges.
- Sand progressively.
- Use dust control.
Material care
Drill and cut with suitable tools, avoid high heat and inspect layer cracks after machining.
Validate
- Dimensions.
- Surface.
- Strength.
| Step | Risk | Control |
|---|---|---|
| Cutting | Dust | Extraction |
| Drilling | Layer crack | Support |
| Sanding | Dimension loss | Pressure |
| Assembly | Burr | Chamfer |
Common engineering mistakes
- Prying supports.
- Sanding too aggressively.
- Ignoring dust.
- Using worn tools.
- No dimensional check.
Buyer checklist
- Is the support accessible?
- Are tools suitable?
- Is dust controlled?
- Are dimensions preserved?
- Is the part inspected?
Describe the part and finishing needs through our quote form.