Application notes, material updates, and technical insights from our engineering team.
Preventing overheating and melting on small 3D printed features through thermal and motion control.
Pinholes are a process and material diagnosis, not a cosmetic issue.
Streaks have a source in material, nozzle or process. Diagnose before changing profiles.
Solving dimensional inaccuracy and print shrinkage problems through material, printer and measurement control.
Filament jams come from contaminants, moisture, heat creep, nozzle wear or excessive retraction. Clear the path and find the cause before printing again.
Treat blobbing as a pressure and material condition. Solve the cause before increasing retraction.
Layer separation is diagnosed from the fracture, not from surface appearance.
Diameter consistency is a measured process capability, not a single specification value.
Wood-filled filament is decorative and process-sensitive. Stabilize flow before finishing.
Nozzle selection balances detail, flow and wear. Track abrasive material separately.
Pressure Advance compensates for extrusion lag at acceleration and deceleration. Tune it after flow calibration and re-check when speed changes.
Calibrate flow as part of a controlled extrusion chain. Verify the result on real walls and dimensions so the correction remains valid across the part.
